Instruction manual

101T-Modell - 13/14 - Ausgabe 08/13 - 2354677 - BUE-0029-14EN
Living
6
Carrying out a reference
run:
 Using the arrow key (Fig. 117,3) on the manual control unit, bring the pull-
down bed down as far as it will go or into any intermediate position.
 Press button "R" (Fig. 117,2) five times in a row in 10 seconds.
 Bring the pull-down bed upwards using the arrow key (Fig. 117,4) and hold
down the arrow key in the uppermost position for 2 seconds.
 When the end position is reached, a beeping noise is emitted. Release the
arrow key.
Lowering the pull-down bed:
 Remove obstacles from the space into which the pull-down bed extends
(e.g. push the seats forward and rotate, remove or move cushions).
 Switch off the lamps underneath the pull-down bed.
 On the manual control unit (Fig. 117,1), press the arrow key (Fig. 117,3)
and keep it pressed until the pull-down bed has moved downwards to its
end position.
 Make sure that the pull-down bed is in the lower end position and is not
resting on obstacles such as headrests or cushions.
Lifting the pull-down bed:
 Switch off the reading lamps in the pull-down bed.
 On the manual control unit (Fig. 117,1), press the arrow key (Fig. 117,4)
and keep it pressed until the pull-down bed has moved up into its end posi-
tion.
 Ensure that there are no objects stuck between the roof and the pull-down
bed.
Overload protection If the pull-down bed meets an obstacle during opening or closing (e.g. a
person or a headrest), the overload protection stops the movement. For
release, move the pull-down bed with the arrow key in the opposite direction.
Safety net The safety net (Fig. 118,2) and the retaining belts are located underneath the
mattress in the pull-down bed. Only use the safety net if persons are already
in the pull-down bed.
Setting up:
 Attach the retaining belts (Fig. 118,1) to the hooks on the ceiling.
Access ladder Always use the provided access ladder to climb up to the pull-down bed.
Attaching:
 Hook access ladder (Fig. 118,5) to the pull-down bed by attaching the two
hooks (Fig. 118,4) in the holding bar (Fig. 118,3).
Storing away:
 Hang the access ladder (Fig. 118,5) from the holding bar (Fig. 118,3) on
the pull-down bed.
 Store the access ladder securely.