AR user guide_Layout 1 11/18/13 10:49 AM Page 1 AR Riflescopes™ User Guide This user guide includes information for the entire AR riflescope line. Please review thoroughly, and pay close attention to the details pertaining to your specific riflescope model.
AR user guide_Layout 1 11/18/13 10:49 AM Page 2 Congratulations on purchasing a Burris® AR Riflescope™ ! AR Riflescopes feature the Burris C4 Plus™ System (Cartridge Calibrated Custom Clicker – plus wind), giving shooters the ability to match elevation adjustment to their favorite cartridge and bullet, making pinpoint accuracy easier to achieve. AR Riflescopes are delivered to you with one custom knob calibrated for a popular tactical cartridge. You are eligible to receive another custom knob for FREE.
AR user guide_Layout 1 11/18/13 10:49 AM Page 3 4= 5.0 ™ 5.56X45 NATO 55GR FMJ 3200FPS 2000FT 1= 1.0 4= 5.0 2= 2.2 5= 6.5 3= 3.5 6= 8.5 The C4 Plus custom knobs eliminate the guesswork for holdover. Just dial in the known distance and use the customized MOA WindMap to determine the hold-off for a 10 MPH wind. In the example above, at 400 yards you simply hold 2.9 tick marks into a 10 MPH wind for pinpoint accuracy.
AR user guide_Layout 1 11/18/13 10:49 AM Page 4 4. Make note of the scope serial number on the bottom portion of the adjustment turret. 5. Log on to www.BurrisOptics.com, enter the Ballistic Services section and choose the C4 Clickers option. 6. Follow the prompts for providing Burris with all the necessary information for Burris to produce a perfected Custom Clicker for you. You qualify for one FREE Custom Clicker with the purchase of your AR Riflescope.
AR user guide_Layout 1 11/18/13 10:49 AM Page 5 Parallax/Focus Adjustment – Not available on all models – Parallax is the apparent movement of the reticle in relation to the target when the eye is not directly in line behind the center of the scope. Images from different distances focus in front of or behind the scope’s reticle. Parallax is more noticeable with higher magnification scopes. Parallax is adjusted by rotating the parallax adjustment ring located on the objective bell.
AR user guide_Layout 1 11/18/13 10:49 AM Page 6 How to Use Your AR Riflescope Calculating Holdover/Hold-Off The C4 Plus Custom Clicker ensures that elevation adjustment perfectly matches the ammunition you are shooting, and when used properly eliminates the need to calculate holdover. Determining an accurate distance to your target is key, and Burris recommends using a rangefinder in the field for optimum accuracy.
AR user guide_Layout 1 11/18/13 10:49 AM Page 7 Eyepiece Focusing The eyepiece can be focused so that the reticle appears sharp and black. Adjusting the focus is quick and easy to do, just follow this procedure: 1. Point the scope at the sky or a plain wall and take a quick glance through the scope. If the reticle appears sharp and black, no further adjustment is necessary. 2.
AR user guide_Layout 1 11/18/13 10:49 AM Page 8 Warranty This AR Riflescope is covered by the Burris Forever Warranty! Thank you for choosing Burris. You can be confident that the optic you purchased is built to the most exacting standards. You can count on Burris to perform every time you use it. We’re so confident in the craftsmanship of our products that we back them with a warranty that covers defects in the workmanship and materials. TO ACTIVATE YOUR WARRANTY, register your new product online at www.
