Installation guide

7
* ITEMS NOTED ARE SOLD SEPARATELY
ITEMS INDICATED AS “NOT SUPPLIED” CAN BE OBTAINED FROM YOUR LOCAL HARDWARE STORE.
Optional Outside Ø4”
Combustion Air Kit
Model No.: BFP4-AK
(Ø4” Ducting not included)
Only the following
doors have been tested
and approved for use
with this fireplace:
Crown-Breckinridge
or
McKenzie-Pendelton
Refractory Firebrick Liners
(Herringbone Pattern shown, also available
in Running Bond - see Pg.28)
FBK63SHB- Herringbone
FBK63FRB- Running Bond
ITEM P/N DESCRIPTION QTY
1 TFS63-1 HEARTH (Left or Right) 2
1A TFS63-1A HEARTH CENTER 1
2 TFS63-2
REAR WALL (2 PIECES)
3 sets
3 TFS63-3 SIDE WALL 7
3A TFS63-3A SIDE WALL (with Ø4” Outside Combustion Air Hole) 1
4 TFS63-4 DOWN-DRAFT DIVERTER (2 PC) 1 set
5 TFS63-5 DOME REAR - LOWER 1
6
TFS63-6*
LINTEL 1
7 TFS63-7 DOME SIDE - LOWER & UPPER 4
8 TFS63-8 DOME SIDE - MIDDLE 2
9 TFS63-9 DOME TOP FOR 16” CLASS A CHIMNEY 1
10 TFS63-10 DOME FRONT/REAR - MIDDLE 2
11 TFS63-11 DOME FRONT/REAR - UPPER 2
12 TFS521 RATING PLATE, TFS63 1
13
APD-AC16*
Ø16” DAMPER / ANCHOR PLT ---
14
BAP-IG*
INSULATION BLANKET ---
15 BFP4-AK * 4 INCH DIA. OUTSIDE AIR KIT 1
16 BK63 * STEEL SUPPORT PLATFORM 8 INCH HIGH 1
17
NOT SUPPLIED
CEMENT BOARD, TFS63 ---
18 SBK-AB8 * ASSY, FLOOR JOIST BRACE 4
19
INCLUDED
1/2” REBAR x 36” 10
20
NOT SUPPLIED
ALL-THREAD BAR, 1/2-13 UNC X 12”
4
21
NOT SUPPLIED
NUT, 1/2-13 UNC
8
22
NOT SUPPLIED
WASHER, Ø1/2” X 1/16
8
TFS-63 Fireplace Parts List