User guide

Linking to a computer

The phone is equipped to operate in close cooperation with a computer

system to allow several possibilities:

• Initiate and terminate calls using applications that suppport Microsoft’s

Telephony Application Programming Interface (TAPI) standard,

• Wireless modem, fax, send and receive SMS,

• Updating of the phone’s internal software to the latest version.

To form the link, you will need a computer equipped with a vacant USB port

and a standard USB cable of appropriate length with a USB type A connec

tor at one end and a USB type B connector at the other.

To link the phone to a computer

Note: The phone and the computer can be switched on or off while linking.

1 Before linking the phone and computer, install the USB driver which is

downloadable from

www.burnsidetelecom.com

USB type B

connector

USB type A

connector

4 On the computer, use drivers for a generic 19200 fax/modem.

If you intend to use TAPI enabled applications, ensure that the

TAPI op-

tion is enabled within the Settings menu of the phone - see page 30 for

details.

3 At the other end of the USB link cable,

insert the other connector into a vacant USB

socket on the computer.

2 Insert the ‘squarer’ of the

two USB connectors into the

socket on the rear panel of the

phone, between the power in

put socket and the red power

button.

Note: P390 models additionally support GPRS data communications.