User manual

The unit registers missed, received and dialled numbers.
The call register also provides another quick way of making a call.
Missed calls (press 0# followed by 31)
This shows a list of those people who called but were not answered. When
scrolling through this list, you will be given the opportunity to call the number.
Received calls (press 0# followed by 32)
These are calls that were answered. The facility to call the number also applies.
Dialled numbers (press 0# followed by 33)
These are calls that were made from the handset (not via phonebook). The
facility to call the number also applies.
Erase dialled list (press 0# followed by 34)
This erases the dialled number list for privacy.
Show durations (press 0# followed by 35)
This shows the last call duration and the total call duration of the terminal since
manufacture.
Show GPRS log (press 0# followed by 36)
This shows the accumulated total of transmitted (sent) and received data. The
log is updated at the end of a GPRS session.
Clear GPRS log (press 0# followed by 37)
This clears both the transmit and received data log.
N.B. If a SIM is changed for a different one, the registers are automatically
erased. If the SIM is removed and replaced with the same SIM the registers
remain as they were.
When the inbox is full and new message(s) are waiting to be received, an alert is
shown on the display to remind you to delete read messages to make room for
new ones (deleting messages from the outbox will also free up space).
Outbox (press 0# followed by 23)
This is a storage location for saving messages that you create and want to keep.
You can use this facility to store template messages as well.
When viewing the list of outbox entries, the first 12 characters of the message
are shown. Select the item you want by pressing 0. The text can now be edited
in the normal way before sending. Press and hold the # key to take you to the
end of the message. Press the # key twice and enter the destination number or
search your phonebook. To delete messages from outbox, press # at the end of
the message then 0 to erase.
Note: Editing an outbox message prior to sending, will not change the actual
content of the outbox, just the message that is sent.
Message settings (press 0# followed by 24)
Use this to change the message centre number.
When this item is selected the existing number is shown and it may be
edited/replaced with a new number which would be provided by your service
provider. This facility is not normally required.
Cell broadcast/information service is not supported.
Section 8
Messages – 2
12 13
Section 9
Call register – 3