Operating instructions

@
PLACE THE EXTENSION TOP PANEL IN
POSITION WlTH THE FLANGES EXTENDING
DOWN OVER THE EXTENSION SlDE PANELS.
SECURE WlTH THE SIX SHORT S.M.S.
TO INSTALL THE FRONT DOOR
'PANEL
,
ENGAGE THE BOTTOM
FLANGE FIRST, FULLY SEAT
THE TOP OF PANEL WHILE
HOLDING DOWN THE DOOR
LATCH AND RELEASE LATCH
TO SECURE PANEL IN POSITION.
@
ASSEMBLE THE BOTTOM FRONT
TIE PANEL TO THE EXTENSION
SIDE
PANELS
WITH
THE
FOUR
LONG SHEET METAL SCREWS.
BOTTOM FRONT TIE PANEL
8
RIGHT
HAND
SlDE PANEL
FLUSH JACKET
--
ALL FLUSH JACKET SCREWS ATTACHING SlDE PANELS TO THE FRONT PANEL
MUST BE LOOSENED.
@
ASSEMBLE THE TWO EXTENSION SlDE PANELS WlTH THE NOTCHED
EDGE INSERTED BETWEEN THE
FLUSH JACKET SlDE AND FRONT
PANELS. TIGHTEN SCREWS TO
HOLD PANELS IN PLACE.
Jacket Extension Assembly
Fig.
10