Operating instructions

4
5. Keep boiler area clear and free from combustible
 materials,gasolineandotherammablevaporsand 
liquids.
6. Provide positive assurance that adequate
combustion and ventilation air is provided from the
outdoors to the burner/boiler system and boiler
room.
7. Do not place any obstructions in the boiler room that
 willhindertheowofcombustionandventilatingair.
8. Carefully read this and all other manuals and
instructions provided before proceeding with the
installation or service of the burner/boiler system.
Post all instructions and manuals near the boiler for
reference by service personnel.
9. Refer to burner manufacturer’s installation manual
provided for proper venting of the gas train
components that require atmospheric pressure to
balance a diaphragm.
10. High water temperatures increase the risk of burns
or scalding injury. Install an automatic mixing
valve at any tankless heater outlet to avoid
 excessivelyhotwateratthextures.
11. All cover plates, enclosures and guards must be in
place at all times, except during maintenance and
service.
1. This boiler has a limited warranty, a copy of which is
printed on the back page of this manual.
2. It is the responsibility of the contractor to see that all the
controls are correctly installed and are operating properly
when the installation is completed.
3. For optimum performance and serviceability
from this unit adhere to the following
recommendations:
A.Cleanretubesatleastonceayear,preferablyat
the end of the heating season to remove soot and
scale. Inside surfaces of the furnace, front and
rear smokeboxes, and reversing chamber should
also be cleaned at the same time.
B. Have the burner and controls checked at least
once a year or as necessary.
C. Retain your contractor or a competent serviceman
to assure that the unit is properly adjusted and
maintained.
NOTICE