Specifications

8
9
Model Number Kit Includes
Stages
(Dedicated Terminals)
Common Features Wiring Terminals
Prestige IAQ 2.0 Kits
YTHX9421R5051
Prestige IAQ 2.0 System Kit Including: Prestige IAQ 2.0 HD Thermostat,
Equipment Interface Module (EIM) and two duct sensors for alerts
diagnostics.
Up to 4H/2C Heat Pump & 3H/2C
Conventional
(Up to 4 Cool Conventional using the
universal outputs [commercial only].
Up to 2 stages of Geothermal Radiant
Heat using the universal outputs).
Prestige IAQ – R, C
Equipment Interface Module – R, C, W-O/B, W2/
AUX1, W3/AUX2, Y, Y2, G, A-L/A, U1, U1, U2, U2, U3,
U3, RH, RC, R, C, S1, S1, S2, S2
YTHX9421R5069
Prestige IAQ 2.0 System Kit Including: Prestige IAQ 2.0 HD Thermostat,
Equipment Interface Module (EIM), Wireless Outdoor Temperature Sensor and
two duct sensors for alerts and diagnostics.
YTHX9421R5077
Prestige IAQ 2.0 System Kit Including: Prestige IAQ 2.0 HD Thermostat,
Equipment Interface Module (EIM), Portable Comfort Control, Wireless
Outdoor Temperature Sensor and two duct sensors for alerts and diagnostics.
Prestige 2.0 Thermostat and Kits
THX9321R5030 Prestige 2.0 HD Thermostat.
Up to 3H/2C Heat Pump & 2H/2C
Conventional
(Up to 4 Cool Conventional using the
universal outputs [commercial only].
Up to 3 Heat Conventional using the
universal outputs.
Up to 4 Heat/2 Cool Heat Pump using
the universal outputs. Up to 2 stages
of Geothermal Radiant Heat using the
universal outputs).
C, R, Rc, W-O/B, W2-Aux/E, Y, Y2, G, A-L/A, K, U1,
U1, U2, U2
YTHX9321R5079
Prestige 2.0 System Kit Including: Prestige 2.0 HD Thermostat and Wireless
Outdoor Sensor.
YTHX9321R5061
Prestige 2.0 System Kit Including: Prestige 2.0 HD Thermostat, Portable
Comfort Control and Wireless Outdoor Sensor.
Model Number Kit Includes Schedule Options Common Features Wiring Terminals
YTH6320R1001
Programmable FocusPRO, Equipment Interface
Module and Return Air Sensor
Program
Options
Temporary
Override
Permanent
Hold
Equipment Interface Module - C, R, Rc, Rh, W-O/B,
W2-Aux/E, Y, Y2, G, L, RAS, RAS
5-1-1 / 5-2 Day Yes Yes
YTH5320R1000
Non-Programmable FocusPRO, Equipment Interface
Module and Return Air Sensor
N/A
Wireless FocusPRO Systems (Non-Zoned)
Application
• Stages
- Up to 3H/2C Heat Pump or 2H/2C
Conventional
• Gas, Oil or Electric
• Heat Pump
• Forced Warm Air
• Hot Water
• Steam/Gravity
Power Method
• Equipment Interface Module - 24 VAC
• FocusPRO - Battery
Model Number Common Features Wiring Terminals
YTL9160AR1000
Equipment Interface
Module - 3 Wire
YTA7210-AR-SPK
EConnect Wireless Thermostats for Electric Heat
Equipment
• Baseboard
• Convector
• Fan Forced Heater
Power Supply
• Thermostat: 2 AA batteries, EIM: Hardwire
Specifications
• Color - Thermostat: White EIM: comes with White and Light Almond
covers
• Switching - SPST
• Switching method - Relay
• Maximum Load - 1500 W @ 120 V, 3000 W @ 240 V
• Minimum Load - 50 W @ 120 V, 100 W @ 240 V
Programming Options
• 7-Day/5-2 Day
• Energy Aware
• Temporary Override
• Permanent Hold
Limited Warranty
• 3 Year
RedLINK Accessories
• Displays Outdoor Temperature only
- Wireless Outdoor Air Sensor (C7089R1013) Required
• Temperature Control on Demand
- Portable Comfort Control (REM5000R1001) Required
• Connect to the Internet
- RedLINK Internet Gateway (THM6000R1002) Required
Solutions
• Relocate Thermostat Without Running New Wires
• Upgrade to Multi-stage or Add Cooling Without
Running New Thermostat Wires
• Displays Outdoor Temperature and Humidity
- Wireless Outdoor Air Sensor (C7089R1013)
Required
• Temperature Control on Demand
- Portable Comfort Control (REM5000R1001)
Required
• Adjust All RedLINK Enabled Thermostats from a
Single Control
Features and Functions
• Permanent Memory Retention
• Selectable Auto or Manual Changeover
• Remote Locator
• Advanced Dual-Fuel Heat Pump Operation
• Backup Control
• Private Labeling Available
• Adaptive Intelligent Recovery
• Temperature Setpoint LImits
Display Information
• 5.09 sq. in. Display Size (Viewable)
• On-Demand Backlighting
• Simultaneous Display of Room and Set
Temperatures
User Interface
• Soft Keys
Limited Warranty
• FocusPRO and Equipment Interface
Module — 5 years
Display
• User Interface: Soft Keys
• English display ONLY
• 4.53 sq. in. Display Size (Viewable)
• On Demand Backlighting
Control
• Permanent Memory Retention
• Early Start
• Temperature Limits
• Unoccupied input (Req. CT240 or CT241)
• 15’ Floor Temperature Sensor
Accessories
THM6000R1002
RedLINK Enabled Internet Gateway
C7189R1004
Wireless Indoor Sensor
C7089R1013
Wireless Outdoor
Sensor
REM5000R1001
Portable Comfort
Control
C7735A1000
Return/Discharge Air Temperature
Sensor
THM5421R1013
Prestige IAQ Equipment
Interface Module
YTHM5421R1002
Prestige IAQ EIM with Return/
Discharge Air Temperature Sensors
THM5320R1000
Equipment Interface Module
TLM1110R1000
Honeywell Wireless Line Volt
Equipment Interface Module
THM4000R1000
Wireless Adapter
(for TrueZONE and TrueSTEAM)
THP9045A1023
Prestige WireSaver Module
Prestige 2.0 Comfort Systems Selection Guide
Equipment
• Heat Pump (Geothermal & Air to Air)
• Forced Warm Air
• Hot Water
• Steam/Gravity
Commercial
• Only allows temporary setpoint
adjustments to conserve energy
• Initiate occupancy
• Display thermostat name on home screen
• Remote setback using an occupancy
sensor
• Pre-occupancy purge
• Economizer/Time of Day
• 6 - Commercial Dehumidication Options
• 365 day Holiday Calendar (Preloaded and
up to 25 custom events)
Power Supply
24 VAC
RedLINK Accessories
• Displays Outdoor Temperature and
Humidity
- Wireless Outdoor Air Sensor
(C7089R1013) Required
• Temperature Control on Demand
- Portable Comfort Control
(REM5000R1001) Required
• Remote Indoor Temperature and Humidity
Sensing
- Wireless Indoor Air Sensor
(C7189R1004) Required
• Connect to the Internet
- RedLINK Internet Gateway
(THM6000R1002) Required
Programming
• 7-Day, or Non-Programmable
• Residential Commercial
• Programmable Fan
• Vacation Hold
Display
• HD Color
• Touchscreen User Interface
• 8 sq. in. Display Size (Viewable)
• On-Screen Help
• Backlighing - Continuous or
On-Demand
• Simultaneous Display of Room and Set
Temperatures
• Real-Time Clock
• Language Options
• Interview-Based Programming and
Installer Setup
• USB Port for Uploading Logo and Preset
Installer Setup
Alerts and Diagnostics
• Universal Predictive Delta T Alerts and
Diagnostics - Requires EIM
• Alerts Using Dry Contact Input(s) -
Requires EIM
• Customizable Reminders (Calendar and
Temperature Based)
• Filter, Humidier Pad and UV Lamp
Replacement Reminder
• User Interactions Log
• Alerts Log
• Dealer Logo On-Screen
Control
• Fan Circulation
• Congurable Staging
• IAQ Control & Selectable Outputs
• Wired Sensor Inputs
• Permanent Memory Retention
• Auto or Manual Changeover
• Adaptive Intelligent Recovery
™
• Temperature Setpoint Limits
• Keypad Lockout
• Advanced Dual-Fuel Heat Pump Operation
Limited Warranty
5 years