Specifications

29
All MPC cast iron boiler
sections are poured at
Burnham Foundry, LLC in
Zanesville, Ohio
Three-pass cast iron
sections are the key to
providing the MPC's
remarkable efficiency
Each cast iron section is precision
machined to tolerances within
0.001 of an inch
Multi-Pass Commercial Boiler
• Automatically presents boiler sequence, alarm,
hold and lockout messages
• Diagnostic menu displays the last 10 alarm
messages and the boiler return temperature
alarm history
Modulation Rate and On/Off Modes
• Controls the boiler modulation and on/ off
output based on the supply water temperature
and an operator adjusted setpoint.
• Can respond to remote system water, outside
air temperatures, Domestic Hot Water Priority
(DHWP) or Energy Management Systems (EMS)
Outdoor Air Temperature Reset
• Saves fuel by reducing the supply temperature of
a heating boiler as the outside air temperature
increases
Warm Weather Shutdown (WWSD)
• Prevents the boiler, boiler pump and/or the
system pump from starting during warm
weather
Domestic Hot Water Priority (DHWP)
• Continuous supply of hot water, even during
warmer months
System Control Outputs
• Fully integrated automation of mixing valves,
boiler pumps, system pumps, and standby
system pumps
• Controls are field selectable through simple
yes/no menu selections
The Burnham Commercial SBC is a complete boiler monitoring and
automation system. Available as an option, this exclusive feature was
designed and developed by Burnham Commercial engineers and is
available ONLY on Burnham Commercial products.
Designed to maximize system efficiency and minimize energy usage
Easily connected to building management systems
Proven control platform, used successfully for years at other
Burnham companies
Fail-safe design insures boiler operation
Only available from
Burnham Commercial!
Advanced Adaptability
• Easily integrated into existing or new building
management systems
• Simplified connections available to most building
management systems through Modbus
®
or
standard 0-10 volt signals
• Uses sophisticated PID control logic for complete
boiler system control
• Performs control functions for both single and
multiple boilers
Peer-To-Peer Network
• Includes lead-lag sequencer for up to eight (8)
fully modulating boilers
• Capable of auto rotation, outdoor reset and
peer-to-peer communication
• “Plug and play” communication by simply
connecting a RJ11 telephone line between boilers
• Provides precise boiler coordination by sequencing
boilers based on both remote system water
temperature and boiler modulation rate.
• Boilers are modulated in “unison”, all at the same
firing rate to ensure even heat distribution
Fail-Safe System Operations
• Allows continued boiler operation in the event of
selected sensor failure or building management
system failure
Boiler Monitoring & Diagnostic Displays
• Two-line by sixteen character LCD display
SBC Exclusives
POWER
LOCKOUT
MENU ENTER
SBC
™
SBC
™
Integrated Boiler Control System