Burley Tail Wagon™ and Rover ™ Owner’s Instruction and Safety Manual pet trailer Tail Wagon™ Stroll Bike Ski Rover™ Stroll Tail Wagon™ model shown
pet trailer Burley Tail Wagon™ and Rover ™ Owner’s Instruction and Safety Manual Contents 3 Introduction 3 Safety Guidelines 3 4 Parts and Tool List Instructions 9 Safety Checklists 9 Maintenance and Storage 10 Replacement Parts and Diagram 11 Warranty
Congratulations! Trailering Safety Guidelines You've just purchased a Burley® pet trailer. Every effort has been made to ensure your purchase is of top quality and proven design, ready to provide you with many years and miles of happy, safe use with your animal companion. Please go to www.burley.com or contact us at (541) 687-1644 or burley @ burley.com to register your warranty information.
9. Never use the trailer if it is damaged in any way. Do not make modifications, as alterations may result in a structurally unsound and unstable trailer. For a complete parts list and product diagram, please go to www.burley.com. Wheel Guard Tube Installation Locate threaded holes in center of trailer bottom side frame tubes. With wheel guard tube ends facing toward the wheels (away from the trailer front), match tube holes and frame holes. Insert and tighten provided screws securely.
Attaching Wheels Attaching Tow Bar Insert wheel axels into the axle receiver. Close securely, with levers aimed to trailer rear. Inflate tires to pressure recommended on tire side wall. Photo 5 Slide tow bar through both receptacles on left side. Line up back tow bar hole with rear receptacle hole. Insert the retaining pin through both holes and lock retaining hoop securely. Photo 7 Warning! Never operate trailer without retaininig pin locked in place.
Attaching Cover Attaching Tailgate On front, fasten buckles together on sides. On rear, hook O-rings over side knobs. Fasten snaps on top. Photo 8 Snap buckle parts together on trailer sides under cover. Photo 9a (To help prevent unplanned exits use attachment shown in Photo 9b.
Removing Floor Operating Kickstand (Tail Wagon Only) For cleaning, floor may be removed by lifting at front. Photo 10a Remove floor cover from base for cleaning Reinsert floor rear under nuts in trailer rear and D-rings on sides. In front corners, snap floor under front nuts. Photo 10b Use side knob to raise and lower kickstand. Using Trailer as a Stroller (Tail Wagon Only) Slide tow bar through both receptacles on left side. Line up front tow bar hole with rear receptacle hole.
Converting from Strolling to Trailering Remove retaining pin from tow bar, slide bar forward and line up rear hole with rear receptacle hole. Insert pin through both holes and fasten safety pin securely. Loosen knob and swing wheel up into “BIKE” position. Tighten knob. Figure 2 Now attach trailer to bike, using Burley hitch. Hitching Trailer to Bicycle 1. Remove quick release lever assembly from bike. 2. Line up hole on flat side of hitch upper arm with left (non-chain ring side) rear dropout hole. 3.
Safety Checklists Maintenance and Storage Before Each Ride: Hitch and Tow Bar Maintenance Wheels tightly attached l Tires inflated to recommended pressure on side wall l Hitch properly secured with safety strap in place l Locked retaining pin for tow bar l Bicycle safety check, especially brakes and tires l Helmet for cyclist l Safety flag in place l Ensure pet is calm l Maximum load 75 lbs./27.9 kg. Store trailer indoors if possible.
2008 Tailwagon and Rover Replacement Parts and Diagram Diagram # Tailwagon Part # Rover Part # Description Warranty 1 960000 960000 Standard Hitch 2 960009 960009 Safety Flag 1 year 3 250144 250144 Handle Bar Assembly w/Tether lifetime 250130 250129 Side Panel/Bag with Windows (NOT SHOWN) 1 year 250128 250127 Cover (NOT SHOWN) 1 year 950017 950017 Floor with Covering 1 year 5 950019 Tow Bar Receiver Kit (front tow bar receiver, 950019 rear tow bar receiver, tow bar glides, bolts,
Burley Trailer Limited Warranty Burley trailers are warranted against defects in materials and workmanship under normal use and service. Burley will repair or replace parts it determines to be defective as follows: fabric parts for one year, plastic parts for three years and durable frame parts for five years. The Burley trailer owner must present the trailer for repair at place of purchase, with an original sales receipt or similar proof of purchase.
Copyright © 2007 by Burley Design LLC “Burley” is a registered trademark of Burley Design LLC “Tail Wagon,” and “Rover” are trademarks of Burley Design LLC Rev 09/07 170052 manual Tail Wagon, Rover 08 Rev0
