User Guide

Burley Piccolo Owner’s Instruction & Safety Manual

Stays may mount to ei ther side of the tabs on the rack, depending on which al lows

proper alignment with the brazeons. You may need to ad just the bend in the ﬂ at tab

on the end of the stays to ensure that the stays meet the brazeons square ly.

If the bike you are work ing on does not have brazeons, use the ap pro pri ate seat-

stay band clamps and the ex tra nuts pro vid ed. Even when equipped with brazeons,

some bikes may require the use of the band clamps to get the rack level. In some

cases—e.g., large frame bikes—you may need to mount the band clamps with the

tabs facing forward or out ward (instead of fac ing inward as shown in il lus tra tion

below). Tight en into place. Torque all bolts to 5–6 ft.-lb.

Seat Stay

Band Clamp

Split Lock

Washer

12mm

Holes for

Bicycle

Fender

12mm

16mm

Split Lock

Washer

Split Lock

Washer

Split Lock

Washer