Operation Manual

3
Burley Encore Owner’s Instruction and Safety Manual
I. Hardware Bag Contents and Tool List
IMPORTANT: Please verify that you have received all of the con tents
listed. Do not proceed with as sem bly if any parts are miss ing; con-
tact Burley im me di ate ly for replacement parts.
Hardware Bag Contents
Refl ectors:
(2) small red refl ectors
(2) small white refl ectors
(4) hex head refl ector screws
(2) wheel skewers with springs and nuts
Envelope:
Trailer Checklist
Warranty Card
Burley Encore Owner’s Instruction & Safety Manual
II. Mounting the Refl ectors
1. With the trailer side panels in
fold ed po si tion locate one of
the black molded hinges (A) at
the rear trailer cor ner.
2. At the top of the hinge
lo cate the screw hole (B) and
re fl ec tor locating boss (C).
Each re fl ec tor has a screw hole
(D) and a location stub (E).
3. Take a red re fl ec tor and screw
it to the hinge as shown in
the fi gure below. Line the
re fl ec tor hole (D) up with the
hinge screw hole (B) and the
re fl ec tor stub (E) with the
hinge lo cat ing boss (C).
4. Repeat the procedure with
the second red re fl ec tor, on the other rear trailer hinge.
5. In similar fash ion, repeat steps 1 through 4 on the trailer front using the
two clear re fl ec tors.
A
B
D
E
C
Tools required:
Small and large Phillips screwdriver
4/16” or adjustable wrench