Operation Manual

3
Burley d’Lite Owner’s Instruction and Safety Manual
I. Hardware Bag Contents and Tool List
IMPORTANT: Please verify that you have received all of the con tents
listed. Do not proceed with as sem bly if any parts are miss ing; contact
Burley im me di ate ly for replacement parts.
Hardware Bag Contents
Refl ectors: Quick-Release Levers:
(2) Front refl ector, clear (2) Quick-release lever
(2) Rear refl ector, red
(4) Self-tapping screw, refl ector
Envelope: Tools Required:
Trailer Checklist 5/16", 8mm or small adjustable wrench
Warranty Card Small, straight blade screwdriver
Burley d’Lite Owner’s Instruction & Safety Manual
II. Mounting the Refl ectors
REAR REFLECTORS:
1. With the trailer side panels in
folded position locate one of the
black molded hinges (A) at the rear
trailer corner.
2. At the top of the hinge locate the
screw hole (B) and re fl ec tor locating
boss (C). Each refl ector has a screw
hole (D) and a location stub (E).
3. Take a red re fl ec tor and screw it
to the hinge as shown in the fi g ure
below. Line the refl ector hole (D) up
with the hinge screw hole (B) and
the refl ector stub (E) with the hinge
lo cat ing boss (C).
4. Repeat the pro ce dure with the
sec ond red re fl ec tor, on the other
rear trailer hinge.
A
B
D
E
C