Operation Manual

Hooking up Your Trailer

1. Installing the hitch to your bike: Remove quick-release or nut from the left side of bike’s

rear wheel axle. Install hitch between quick-release or nut and frame. Tighten the

quick-release or nut following manufacturer’s recommendation. The hitch can remain

on the bike when trailer is removed.

2. Hooking the tow bar to the hitch: Insert ex connector in between the two holes on the hitch.

Insert lock pin and close retainer. Wrap safety strap around the frame of the bike twice and

latch to the D-ring on the tow bar.

10.