Operation Manual

Attaching the Cover and Safety Flag
1. D’Lite, Cub, Solo and Encore: Attach cover to trailer using provided screws and insert safety ag
into circular knob on handlebar (Figure 12). Slip the cover D-rings over the hooked corners of the
tow bar receivers (Figure 13).
2. Honey Bee: Attach cover to trailer using provided screws and insert safety ag into circular knob on handle
bar (Figure 12). Fasten velcro to the bottom rear of the trailer. On the trailer front corners, slip the tabs
over the plastic hooks (Figure 14).
3. Bee: Attach cover at top using snaps ( Figure 15, A ). On the trailer front and back slip the cover elastic pull tabs
over the ends of the frame tubes ( B ). Insert safety ag into sleeve located on the back left side of the trailer ( C ).
9.
D’Lite, Cub, Solo and Encore
Figure 12
Figure 13
Honey Bee
A.
C.
B.
B.
Figure 14
Figure 15
Bee