User guide

6 - 0911
english
2.3 Parameters
Hy Hysteresis 0.1 K + 25.5 K / 1°F + 255°F
Cooling with SET+HY relay on
Heating with SET-HY relay on
*PTB internal value
*rel internal value
Pbc type of sensor Ptc = PTC; ntc = NTC
dAO Alarm delay at 0 ... 24 hours; Resolution 10 min
with Mains ON Time duration after start of installation
during which no alarm situations have
been indicated
HIGHEST STORED TEMPERATURE
Briefly press the button once.
The message Hi and and then the display of the
maximum temperature appear.
You can return to the normal display by pressing any
button, or by waiting 5 seconds.
RESET THE MAXIMUM AND MINIMUM TEMPERATURE
You can acknowledge the stored value by holding
the SET button down now for longer than 3 seconds,
until the message rST appears on the display.
The message rST blinks as confirmation.
LOCKING AND UNLOCKING THE KEYPAD
Hold down the buttons and for at least 3
seconds. The message POF appears on the
display. The keyboard is locked. You can only view
the set-value and the minimum and maximum
temperature. The POF message also appears if you
hold down a button for longer than 3 s.
The keyboard will be unlocked if you hold down
the buttons and for 3 s.
NOTE
When commissioning for the first time, reset the maximum and
minimum temperature.