User guide

29
Electrical connection
10.3.2. Pin assignment for operating voltage
Pin Wire
color
7)
Configuration External circuit / Signal level
3 green GND
3
4
24 V DC ± 10 %
max. residual ripple 10%
4 yellow +24 V
Tab. 12: Pin assignment; operating voltage
10.3.3. Pin assignment for input signals from
the control centre (e.g. PLC)
Pin Wire
color
7)
Configuration On the
device
side
External circuit /
Signal level
1 white Set-point
value +
(0/4 – 20 mA)
1
+ (0/4 – 20 mA)
not galvanically isolated
2 brown
Set-point
value GND
2
GND set-point value
5 grey Binary input
5
+
0 – 5 V (log. 0)
10 – 30 V (log. 1)
with reference to
Pin 3 (GND)
Tab. 13: Pin assignment; input signals of the control centre
10.3.4. Pin assignment for output signals to
the control centre (e.g. PLC) - required
for analogue output option only
Pin Wire
color
7)
Configuration On the
device
side
External circuit / Signal
level
8 red Analogue
feedback +
8
+ (0/4 – 20 mA)
not galvanically isolated
7 blue
Analogue
feedback GND
7
GND (identical with the
GND supply voltage)
Tab. 14: Pin assignment; output signals to the control centre
7) The indicated wire colors refer to the connection cable, part no.
919061, available as an accessory
english
Type 8791