User guide

18
Attachment and assembly
8.2.1. Installation
WARNING!
Risk of injury from improper installation!
• Installation may be carried out by authorised technicians only
and with the appropriate tools!
Risk of injury from unintentional activation of the system and
an uncontrolled restart!
• Secure system from unintentional activation.
• Following assembly, ensure a controlled restart.
Yoke mount procedure:
→ Using the bracket ② the clamping pieces ③, hexagon bolts ⑰
and circlips
⑯ attach the hoop to the actuator spindle.
3
17
2
16
Fig. 6: Attaching the hoop
→ Select short or long lever according to the stroke of the actuator
(see “Tab. 8: Attachment kit for linear actuators”, part no. 6a/6b).
→ Assemble lever (if not pre-assembled) (see “Fig. 7”).
17
16
12
6
19
18
14
12
22
5
4
13
15
Fig. 7: Assembling the lever
english
Type 8791