Owner manual

39
Attachment and assembly
11.2.2. Installation
WARNING!
Risk of injury from improper installation!
• Installation may be carried out by authorised technicians only and with the appropriate tools!
Risk of injury from unintentional activation of the system and an uncontrolled restart!
• Secure system from unintentional activation.
• Following assembly, ensure a controlled restart.
Procedure:
→ Using the bracket ② the clamping pieces ③, hexagon bolts ⑰ and circlips ⑯ attach the hoop to the
actuator spindle.
3
17
2
16
Figure 14: Attaching the hoop
→ Select short or long lever according to the stroke of the actuator.
(see “Table 21: Attachment kit for linear actuators” part no. 6a/6b).
→ Assemble lever (if not pre-assembled) “Figure 15”.
english
Type 8791