Owner manual

36
Functions
10.2. Additional functions
The following additional functions can be configured and parameterized via the communications software:
Function Description
DIR.ACTUATOR
Assignment of the aeration state of the actuator chamber to the actual position.
SPLITRANGE
Signal split range; input signal as % for which the valve runs through the entire
stroke range.
X.LIMIT
Limit of the mechanical stroke range.
X.TIME
Limiting the control speed.
X.CONTROL
Parameterization of the position controller.
SAFE POSITION
Input the safety position.
SIGNAL ERROR
Configuration of signal level, fault detection.
BINARY INPUT
Activation of the binary input.
OUTPUT
Configuration of the outputs (only with auxiliary board for analogue feedback signal).
Table 20: Overview of additional functions
The instructions for the communications software describe in detail the individual menu options, as well as
parameterization and configuration.
These instructions can be found on the internet at www.burkert.com
Documentation
Type 8791 and
are also available on CD which can be ordered by quoting identification number 804625.
english
Type 8791