Owner's manual
Type 8660 Control Center
________________________________________________________
- 7 -
5. Connections
5.1 Wiring diagram
Plug wiring diagram for Control Center 1
Figure 1 shows the backside of Control Center 1 with the plug area (right) and the
symbol list for the pins (left). The plug holds pins 1 to 36. The symbols for the
individual pins correspond fully with the symbols on the operating elements (see
Figure 7 and Figure 8). For further clarification, the plug wiring diagram is described
again in words in Figure 2.
Figure 1: Backside of Control Center 1 (Cannon/ITT plug)
Pin Connection Pin Connection
1 24 V 19 front box blower level 2
2 24 V 20 front box blower level 2
3 24 V 21 front box blower level 2
4 ground 22
5 ignition on (terminal 15) 23
6 motor on (terminal d+61) 24
7 illumination (terminal 58) 25
8
front box flaps windshield
26
9
front box flaps windshield
27 passenger area floor unit
10 front box blower level 1 28 front box blower lever 3
11 front box blower level 1 29 front box blower lever 3
12 front box blower level 1 30 front box blower lever 3
13 driver's seat unit 31 valve potentiometer, shield
14 32 valve potentiometer, ground
15 33 valve potentiometer, sliding contact
16 34 valve potentiometer, supply +
17
front box flaps floor area
35 front box valve motor
18
front box flaps floor area
36 front box valve motor
Figure 2: Plug wiring diagram for Control Center 1