Owner's manual

Type 8660 Control Center
________________________________________________________
- 10 -
5.2 Signal inputs
- input for feedback Ignition on Pin 5
- input for feedback Motor on Pin 6
- input for feedback Illumination on Pin 7
- input for feedback Supplementary heater on (only for Cont. Cen. 2 + 3)Pin 15
- input for feedback Cooling unit on (only for Control Center 3) Pin 24
- input for the potentiometer sliding contact connection
of the front box valve Pin 33
5.3 Signal outputs
Signal outputs for Control Center 1
- output signal for the control of the front box flaps windshield Pin 8, 9
(max. 0.5 A)
- output signal for the control of the front box flaps floor area Pin 17, 18
(max. 0.5 A)
- output signal for the control of the front box blower level 1 Pin 10, 11, 12
(max. 15 A)
- output signal for the control of the front box blower level 2 Pin 19, 20, 21
(max. 15 A)
- output signal for the control of the front box blower level 3 Pin 28, 29, 30
(max. 15 A)
- output signal for the control of a driver's seat unit Pin 13
(max. 5 A)
- output signal for the control of the passenger area floor unit Pin 27
(max. 0.5 A)
- output signal for the control of the front box valve Pin 35, 36
(max. 0.5 A)