Owner's manual

69
6.2. Installation
Supply segment
Pressure gauge module:
→ In the case of the pressure gauge module connect the hose to the pneumatic module before hooking in the
module (see figure: Hose connection of the pressure gauge module).
→ Hook module into the terminal module and swivel in until it engages.
→ Valve segment
→ Hook electronic module into the terminal module.
→ Actuate locking element in the direction of the arrow and swivel in the module all the way.
→ Screw on valves (either depressurized or all affected locations with P-shutoff).
Hose connection
Fig. 12: Hose connection of the pressure gauge module
Type 8650
english
Installation