Owner's manual

6. REMOVAL / INSTALLATION OF INDIVIDUAL

SEGMENTS

6.1. Removal

Supply segments

→ Release required module by actuating the locking element and swivel out.

→ In the case of the pressure gauge module ensure that the hose is disconnected from the pneumatic module

(see figure: Hose connection of the pressure gauge module).

Fig. 10: Removal / installation of a supply segment

Valve segments

→ Remove valves and any protective caps from the plug-in contacts (either depressurized or all affected loca-

tions with P-shutoff).

→ Release the electronic module by actuating the locking element in the direction of the arrow and swivel out the

module (see figure: Removal / installation of the valve segment).

entriegeln

Fig. 11: Removal / installation of a valve segment

Type 8650

english

Installation