Owner's manual

67
5.2. Conversion and Expansion
→ Loosen the clamping bolts (1) on the right supply segment.
→ Loosen the two inclined tie rods (3)
→ Push the supply segment to the right.
→ In the same way more segments can be moved until the position is reached in which the system is to be
changed.
→ When a segment is added, first hook it into the upper edge of the profile rail.
→ Swivel in the segment and push it to the left up to the existing subsystem.
3
Inclined tie rods
Fig. 9: Dock the segment to the system
5.3. Assembly
→ Reassemble the system in reverse order.
Type 8650
english
Installation