Owner's manual

63
3. INSTALLATION ON S7 PROFILE RAIL
(PRE-ASSEMBLED SYSTEM)
3.1. Removing a System from a Profile Rail
→ Loosen all clamping bolts (1) on the connection modules (turn counter-clockwise)
→ Swivel system out of the profile rail.
→ Bring all clamping bolts (1) on the connection modules to the home position (by turning them counter-
clockwise all the way).
→ Hook the system in the required position on the upper edge of the profile rail and swivel open.
→ Tighten all clamping bolts (1) by turning them clockwise (stipulated torque 1.5 Nm).
Fig. 5: Mounting on to the profile rail
Type 8650
english
Installation