Owner's manual

46
5. TERMINAL MODULE
5.1. Configuration and Function
All segments start out on a terminal module.
It anchors all attached components to the profile rail and contains the electric backplane (energy and data bus).
They can not be planned in the hardware configuration programs (e. g. Siemens Step7).
Fig. 18: Terminal module
The EC type-examination certificate can be found in the Annex to this operating manual.
5.2. Marking
Fig. 19: General labelling Fig. 20: Identification and serial number Fig. 21: Location of
the marking
Type 8650
english
Configuration and Function of the
Modules