Owner's manual

109
1.2. Shutdown
1.2.1. Safety Instructions
DANGER!
Risk of injury from high pressure in the equipment!
• Before loosening the lines and valves, turn off the pressure and vent the lines.
Risk of injury due to electrical shock!
• Before reaching into the system, switch off the power supply and secure to prevent reactivation!
• Observe applicable accident prevention and safety regulations for electrical equipment!
(It is permitted to replace electronic modules and valves even while the power is on.)
WARNING!
Risk of injury from improper installation!
• Removal may be carried out by authorized technicians only and with the appropriate tools!
Risk of injury from unintentional activation of the equipment and an uncontrolled restart!
• Secure equipment to prevent unintentional activation.
1.2.2. Shutting down the system
→ Vent the system.
→ Switch off the power supply.
→ Remove the modules. The procedure is described in the chapter “Installation / Removal of Individual
Segments”.
→ Keep the modules in their original packaging or in similar protective packaging.
1.2.3. Restarting the system
→ Unpack and acclimatize the modules before restarting the system.
→ Start-up is described in the chapter “Commissioning / Initialization”.
Type 8650
english
Storage, Packaging,
Transport, Disposal