User guide


English
8645 - 9


All connection variants are suitable for the same mounting bore and can be
subsequently interchanged.
Illustration: Connection variants


•
•
Danger may result from loosening the pneumatic connector.
Pressure may only be connected once all the safety clamps habe been attached cor-
rectly.
Pay attention that the safety clamps are fitted correctly.
Leaking connectors
can result from old, damaged or unsuitable gaskets.
Pay attention to the condition of the gaskets.

Take care that the seal is not damaged during assembly.
1
Legend
1 Safety clamp
Illustration: Changing the pneumatic connectors
Proceed as follows when changing the pneumatic connectors:
Pull out the safety clamps (see illustration) using a screwdriver.
Remove the pneumatic connector.
Install the new pneumatic connector.
Reattach the safety clamps.