User guide


English
8645 - 7
   





  
Report
outputs
150 1  Get/
Set
1 0 or 1 0 Turn on/off output
reports (short circuit
or non-present OUT)
0: Activate output
reports
1 : Deactivate output
reports
Filter inputs 150 1 4 Get/
Set
1 0 or 1 0 Input filter
1: Filter OFF
0: Filter ON
Write
EEPROM
150 1 5 Set 1 1 to  Data can be written
into EEPROM with
this object.
1: Actual module list
is written in EEPROM.
After power-up, it
becomes the Target
module list.
2: As valuje 1, but
here, at the end, a
Diag Byte with the
generated data will be
sent.
: Object Error action,
value, filter input and
reports output are
written into EEPROM.

Error type
and number
151 1 1 Get 1 Error type (MSB 4
Bit) and error number
(LSB 4 Bit) as per
LED display, Byte can
be transferred
cyclically.
Short-circuit
channel,
bus head
151 1 2 Get 1 1 diagnosis bit per 2
bus head outlets.
RIO/ZM 151 1  Get 1 Diagnosis of a RIO/
ZM,
address of a RIO or
ZM, which has a Diag;
MSB shows whether
ZM (0) or RIO (1)
Channel
short circuit
RIO/ZM
151 1 4 Get 1 1 diagnosis bit per 2
RIO/ZM outlets
The effected RIO/ZM
module is shown in
object 151/1/.

Value 9 1 to 16  Get/
Set
2 0x0000
to
0xFFFF
0x0000 Valve value