User guide

8 - 8645



English



If a short-circuit is detected in the segment of the Fieldbus module Profibus

, the output channel on which the

error is to be remedied is described in this byte.

7 6 5 4  2 1 0 Bit

Error at the outputs 1 or 2

Error at the outputs  or 4

Error at the outputs 5 or 6

Error at the outputs 7 or 8

Error at the outputs 9 or 10

Error at the outputs 11 or 12

Error at the outputs 1 or 14

Error at the outputs 15 or 16



If a short-circuit is detected in the segment of an intermediate module or a RIO expansion, the output channel

on which the error is to be remedied is described in this byte.

The byte structure corresponds to that of the byte “Channel display short circuit bus header”.



  

ID No. bus header 0 to 99999999 (8 digits) 4 DP/V1, Slot 0, Index 20

Serial No. bus header 0 to 99999999 (8 digits) 4 DP/V1, Slot 0, Index 204

Software version A 00.00.00 to Z 99.99.99 4 DP/V1, Slot 0, Index 202

Eeprom version A to Z 1 DP/V1, Slot 0, Index 201

ID No. hardware 0 to 99999999 (8 digits) 4 DP/V1, Slot 0, Index 201

Serial No. hardware 0 to 99999999 (8 digits) 4 DP/V1, Slot 0, Index 201

Hardware Version A to ZZ 2 DP/V1, Slot 0, Index 201

Identification &

Maintenance Functions*

(4 call header, 64 body)

DP/V1, Slot 0, Index 255

* only I&M0 (IM_INDEX 65000) is supported