Owner manual



By snapping out the three locking pins, the following
module is released and can be removed without
difficulty.
Releasing the following moduleFig. 4:

Remove the cover module parallel to the side.
→
The interface to expand the valve terminal is now
free.
Removing the cover moduleFig. 5:

If more modules are to be removed, repeat steps
→
1-3.
Ensure that an FE rail on the upper side of the ter-
minal is detached. Also the modules to be removed
must be detached from the wall or top hat rail.
Removing more modulesFig. 6:
english
