Owner manual
1
To expand the FreeLINE valve terminal, first detach
the blue connecting bracket.
Using the two projecting lugs, pull up the blue
→
connecting bracket 1 and remove.
Attaching the connecting bracketFig. 1:
Pulling on one side may damage the locking bracket!
Using a screwdriver, release the 3 locking pins by
→
turning them through 90°.
In the released position the slots in the locking pins
are horizontal. The locking pins project over the
contact surface of the connecting bracket.
Release locking pinsFig. 2:
Supporting the snapping out of the locking pinsFig. 3:
By applying gentle lateral pressure to the exposed side areas of the valve terminal in the vicinity of the cor-
responding locking pins, they can be supported as they are snapped out.
english