Owner's manual

8644/phoenix - 43
SYSTEM DESCRIPTION
Overview of firmware functionalities
PROFIBUS PROFIBUS
up to serial
number 37343
PROFIBUS bus terminal
from serial number 37344 onwards
DPV0 mode DPV1 mode
Device entry Model 8644 8644-DP
(DIP8=OFF)
ME02
8644-DPV1
(DIP8=ON)
ME02
GSD file BUER00F0.gsd BUV100F0.gsd BUER06BA.gsd
PROFIBUS bus terminal exchangeability old
and new version
XX--
DPV0 support
(cyclical communication)
Maximum 184
bytes Process
data
Maximum 184
bytes Process
data
Maximum 184
bytes Process
data
Operation of PCP modules -- X X
DPV1-Read and DPV1-Write support
(acyclical communication),
Category 1 and category 2 masters
-- -- X
Communication with PCP modules via
„normal“ process data (DPV0)
-- X X
Parameterization of large number of E/A's via
dialogues in the project planning tool
-- -- X
Security values set via the project planning
tool
-- -- X
Bytes switched round on IB IL24 DI16 and
IB IL24 DO16 to adapt to the control format
-- X X
Bytes switched round on IB IL24 DI32 and IB
IL24 DO32
-- New from Firm-
ware B onwards
New from Firm-
ware B onwards
Bus stop acknowledgement, either
automatically or via application program
-- X X
Peripheral error acknowledgement, either
automatically or via application program
-- X X
Diagnosis in the PROFIBUS bus terminal X X X
Diagnosis in the identification format -- -- X
Diagnosis as status PDU -- -- X
Stop behaviour can be adjusted via DIP
switch
X----
Stop behaviour can be adjusted via
parameter telegram
-- X
1)
X
1)
Invoke ID transfer
(e.g. for IB IL POS 200)
-- New from Firm-
ware B onwards
New from Firm-
ware B onwards
Dynamic configuration
(Reservation of E/A´s in the PLC,
e.g. for easy expansion)
-- -- New from
Firmware B
onwards
Station ID can be allocated freely (2 bytes)
for improved identification in the network
-- -- New from Firm-
ware B onwards
Failsafe values set via project planning tool --
--
X
1)
see illustration Adjusting the stop behaviour on new devices from serial number 3744 onwards