Owner manual
65
Start-Up
Improper operation may result in injuries as well as damage to the device and the area around it.
Before start-up, ensure that the operating personnel are familiar with and completely understand the contents •
of the operating instructions.
Observe the safety instructions and intended use.•
Only adequately trained personnel may operate the equipment/the device.•
Switch on the supply pressure.•
Only then switch on the power supply!•
Check connections, voltage and operating pressure!
→
Ensure that max. operating data (see type plate) are not exceeded! →
Check that connections 1 and 3 or 5 have been configured correctly; these must not be mixed up! →
Release manual actuation during electrical operation! →
Information on electrical start-up may be found on the Internet under:
www.wago.com
Documentation Wago I/O - System 750
deutsch