Owner manual

63
Maintenance, Troubleshooting




Before dismounting pneumatic lines and valves, turn off the pressure and vent the lines.•

Before reaching into the device or the equipment,• switch off the power supply and secure to prevent
reactivation!
Observe applicable accident prevention and safety regulations for electrical equipment!•


Maintenance may be carried out by authorized technicians only and with the appropriate tools!•

Secure system from unintentional activation.•
Following maintenance, ensure a controlled restart.•

  
Valves do not switch No or inadequate operating voltage Check the electrical connection
→
Ensure the operating voltage according to →
type plate.
Manual actuation not in neutral
position
Move manual actuation to zero position →
Inadequate or no pressure supply Design the pressure supply with the largest →
possible volume (even for upstream devices
such as pressure controllers, maintenance
units, shut-off valves, etc.)
≥

deutsch