Owner manual
11
System Description
The AirLINE system is designed for decentralized use in industrial environments. Electronics and fluidics can be
combined particularly easily and efficiently thanks to the modular design.
If systems in the explosion-protected area are installed in a control cabinet, the following requirements must be met:
The control cabinet must be authorized for use in the explosion-protected area.•
The control cabinet must be large enough to allow the resulting lost heat to be dissipated in a suitable man-•
ner to the outside.
The internal temperature of the control cabinet must not exceed the max. permitted ambient temperature for •
the device.
Before reaching into the device or the equipment,• switch off the power supply and secure to prevent
reactivation!
Observe applicable accident prevention and safety regulations for electrical equipment!•
Type 8644 AirLINE WagoFigure 1:
deutsch