User Manual

10 - 8623-2 Standard
english
5.2 Changing the cable outlet direction
➔➔
➔➔
➔ Unscrew the 4 screws on the front panel of the
flow controller and remove the cover carefully.
➔➔
➔➔
➔ Remove the screw to the valve and remove the
plastic cross.
➔➔
➔➔
➔ Detach the plate from the cube.
➔➔
➔➔
➔ Pull out the cube downwards and replace in the
desired orientation.
➔➔
➔➔
➔ Place the plate onto the cube (the pins must
engage in the guides).
➔➔
➔➔
➔ Lay on the plastic cross and insert the screw
through the cube.
➔➔
➔➔
➔ Connect the flow controller to the proportional
valve (see 5.1).
Fig.: Changing the cable outlet direction