Owner manual

14 - 0258
english
Electrical connections
ATTENTION!
The operating voltage and frequency of the electrical supply
must be the same as quoted on the rating plate of the drive.
The voltages and currents must not lie outside the permitted
operating range.
M
1
6
2
4
3
5
P1
R
s
PolePole
PolePole
Pole
configurationconfiguration
configurationconfiguration
configuration
Pin 1Pin 1
Pin 1Pin 1
Pin 1
Pin 2Pin 2
Pin 2Pin 2
Pin 2
left running plus minus
right running minus plus
Plug configuration LC
Rs = 6.8 kΩ
P1 = 1.0 kΩ / 5.0 kΩ
PolePole
PolePole
Pole
configurationconfiguration
configurationconfiguration
configuration
Pin 4Pin 4
Pin 4Pin 4
Pin 4
Pin 6Pin 6
Pin 6Pin 6
Pin 6
left running minus plus
right running plus minus
P1 = 5.0 kΩ
Plug configuration Mod
NOTE
With a pulsed drive and nominal voltage, the pulse duration
should not fall below 100 ms.
M
M
12
3
4
65