Specifications

Macro Status: In Detail
The Macro Status window indicates which macros, if any, are currently running on the selected unit. The window
displays all the macros you have saved to the unit, and a triangular “play” icon in the left column signifies a
currently running macro. You may not see notification for macros that execute for only a brief moment.
You can use the Macro Status toolbar to start or stop macros. Click Run or Stop as desired, or press the red
Stop All button to suspend all macros on this unit. A macro that is manually stopped will execute again when the
conditions that normally trigger the macro recur.
You can edit the source code for any macro by right-clicking the desired macro in the Macro List. For more on
using macros, see Chapter 10.
Network Clients: In Detail
In the Network Clients window, you can see all PCs that are currently sharing your computer’s connection to any
of your sites. The Network Clients window displays the site to which the remote computer is connected, the
computer’s IP address, network host name, and the time the connection was made. If the network host name is
unavailable, Lynx will redisplay the IP address in the network host name field.
Captures Window: In Detail
The Captures window shows all captures
currently stored on the selected unit. You
can print capture data directly from this
window, as well as save it to your site log.
For more on captures, see page 61.
GSC3000 & VRC2500 INSTALLATION & OPERATION MANUAL
CHAPTER 3: LYNX SOFTWARE OVERVIEW
30