User Manual
Table Of Contents
- Using This Manual
- Table of Contents
- Introduction
- Getting Started
- Arcadia Web INterface
- Logging On
- Viewing Sites
- Adding Tabs
- Adding Sites Within Tabs
- Viewing Alarms
- Creating a Matrix
- Add a Strip Chart Tile
- Add an Angular Meter Tile
- Add a Status Label Tile
- Add a Command Button Tile
- Add an LED Button Tile
- Add a Default Site Tile
- Add an Image Tile
- Add a Label Tile
- Add a Macro Tile
- Add a Meter Status Command Row Tile
- Add a Full Row Header Tile
- Add a Text Meter Tile
- Add a M/S/C Tile
- Add a Timer Tile
- Add a Clear Alarms Tile
- Add an iFrame Tile
- Add a URL Tile
- Add a Label Full Width Tile
- Editing a Matrix
- Global Tabs
- Appendix A: TROUBLESHOOTING
10
VIEWING ALARMS
When you add sites under a tab, a summary list of Alarms for all the sites under that tab is automatically
generated. The alarm list can be made visible by clicking the three dots icon to the right of the tab name. Then
click on the Alarm button that appears on the tab to display Alarms for all sites in that tab.
Figure 12: View Alarms, Events, Macros for a tab
The total number of active alarms on all sites within a tab is displayed in the colored area to the right of the tab
label. In Figure 13 below, a single critical alarm is active in Boston. The indication of a single active critical alarm is
displayed against a red background on both the Boston tab and the Northeast tab. The red alarm button indicates
that the site has uncleared critical alarms. Once the user acknowledges the alarms by clearing them, the Alarms
button will turn gray even if the alarm conditions are still active.
Figure 13: Alarm count shown in tab label
The total number of warning alarms will also be displayed in this area of the tab label against a yellow background.
If any sites under the tab are disconnected and unavailable to Arcadia, the number of disconnected sites will be
displayed in the tab label against a gray background.
Figure 14: Multi-color tab label