Operation Manual

Basic Safe 1 E, Smart Safe 2 E, Universal Safe 2 E
16.12.09 BGR © All rights reserved by BURG-WÄCHTER KG Errors, omissions and changes reserved. Bedienungsanleitung (Universal) engl. 2005_03_16.doc
Operating instructions
Important advice
• Please store the override keys and your Personal Code in a secure
place outside the Safe.
• Do not use personal dates like birthdays, phone numbers, etc.
• Always test the new code several times with Safe door open.
• For your own security, please use a 6-digit code (1 million different
possibilities).
• If the batteries inside the Safe are exhausted, you can only open the
Safe with the key.
Opening your Safe with the override key
• Carefully slide the cover plate away from the keypad on the front
door.
• Enter the override key in the keyhole and turn anti-clockwise until
the stop.
• Turn the knob at the left hand of the keypad clockwise until the stop
and open the door.
Advice: Use the emergency lock only in emergency cases.
How to insert batteries and program your Personal Code
• Remove battery cover on the inside of the door and insert 4 batteries
type LR 6 (Alkaline).
• You can now program your Personal Code.
• Press the red button on the inside of the door. A control diode will
light up on the outside of the door.
• Enter your Personal Code (3 – 6 digits).
• Confirm your Code by pressing the enter/on button on the right at
the bottom of the keypad.
Opening your Safe with the Code
• Enter your Personal Code (3 – 6 digits).
• Confirm your Code by pressing the enter/on button on the right at
the bottom of the keypad.
• A tone signals that the correct Personal Code has been entered. Turn
the knob clockwise until the stop and open the door within approx. 6
seconds of the tone.
Closing the Safe
• Shut the door and turn the knob anti-clockwise until the stop.
New batteries
• If the red control diode lights up, all 4 batteries must be replaced
(type LR 6).
• You need to program your Personal Code again!
Blocking period for wrong Code
• If an incorrect code is entered 3 times, the Safe will ‘Time Out’ for a
short time – a maximum time of 2 minutes.
• Once the ‘Time Out’ has passed, the correct code can be entered
again to open the door.
Installation
• The Safe should be fixed at the wall or floor to protect it against
theft.
Technical details
• Power supply: 4 batteries type LR 6 /AA/1,5 V (Alkaline).
• Working humidity: 20% ~ 90% rH – non-condensed / non-
condensing.