User's Guide

2 Speciﬁ cations

MAGIC SWITCH MS-08

USER’S GUIDE

MICROWAVE CONTACTLESS SWITCH FOR AUTOMATIC DOORS

1 Description

DESCRIPTION SPECIFICATION

Technology Microwave motion sensor

Radiated Frequency 24.125 GHz

Radiated power density 5 mW/cm²

Supply voltage 12 to 24VAC ± 10%

12 to 24VDC +30% / -10%

Main Frequency 50 to 60Hz

Power Consumption < 1.5W

Output

Relay contact rating (max voltage)

Relay contact rating (max current)

Max switching power

Relay with switch-over contact (voltage free)

60 VDC/ 125 VAC

1A (resistive)

30W (DC)/ 60VA (AC)

Detection Range 4” to 24” (adjustable)

Detection Mode Motion (bidirectional)

Output Hold Time 0.5s (in pulsed mode)

Temperature Range -4.°F to + 131°F

Immunity Immune to electrical and radio frequency interference

Weight 0.34 lbs.

Material ABS

Certiﬁ cation Electromagnetic compatibility (EMC) according to 2004/108/EC

FCC: G9B-MS08

IC: 4680A-MS08

75.5265.01 2007DRAFT2 Page 1 of 3

Screw

Faceplate

MS-08

Adapter Ring

Screw

Faceplate

MS-08

Screw

MS-08

Double Gang

MS-08

Single Gang

PAGE 1
MAGIC SWITCH MS-08 USER’S GUIDE MICROWAVE CONTACTLESS SWITCH FOR AUTOMATIC DOORS 1 Description Screw MS-08 Screw MS-08 Screw Faceplate Screw Adapter Ring MS-08 Single Gang Faceplate MS-08 Double Gang 2 Specifications DESCRIPTION SPECIFICATION Technology Microwave motion sensor Radiated Frequency 24.125 GHz Radiated power density 5 mW/cm² Supply voltage 12 to 24VAC ± 10% 12 to 24VDC +30% / -10% Main Frequency 50 to 60Hz Power Consumption < 1.
PAGE 2
3 Precautions Shut off all power going to header before attempting any wiring procedures. Maintain a clean & safe environment when working in public areas. Constantly be aware of pedestrian traffic around the door area. Always stop pedestrian traffic through the doorway when performing tests that may result in unexpected reactions by the door. ESD electrostatic discharge: Circuit boards are vulnerable to damage by electrostatic discharge.
PAGE 3
5 Installation and Wiring (Continued) 3 Setup MS-08 Toggle Mode Pot 4” 3 Output Mode Switch 24” 4” Pulse Mode 24” MS-08 1. Adjust unit to desired setup. Two adjustments can be made to the sensor. The Potentiometer is used to adjust the size of the units’ sensing field and the Output Mode switch is used to select Toggle or Pulse mode. 2. Rotate potentiometer clockwise to increase the size of sensing field. It may be adjusted from 4” to 24”. Sensing Filed 2.