Product Manual

CareCenter MD 1.0 70-00533-02 A
6-7
Stress test displays
Reference beat
The reference beat can be hidden. If both the reference beat and the actual beat are
displayed, these can be shown congruently or with small or great distance from each other.
◆ Right-click and select Reference Beat and select the representation.
Trend panel
The trend representation is updated every 10 seconds.
The colored time scale shows the times of the phases, in each case beginning with zero.
The grey resting phase is followed by the red stress test phase and then by the yellow
recovery phase.
To display the characteristics, place the mouse pointer on any point of time in the chart.
These trend measurement values display:
◆ Load and number of rotations (for a bicycle test)
◆ Speed and grade (for a treadmill test)
◆ Heart rate
◆ Blood pressure
3*4
Configuration Options
Configure the basic settings of
the Averaged Beat
representation
1. Select File | Options … | 12 Lead ECG | Test procedures.
2. Select the test procedure (for example Treadmill Test Bruce)
from the list and open the Display tab.
3. Click on Small preview of the Averaged Beat and make
your changes.
The ST values can be displayed in mm, mV or μV.
Change the measuring units of
the ECG Amplitude
• Select File |Options … | 12 Lead ECG | ECG.