Product Manual

CareCenter MD 1.0 70-00533-02 A
3-23
Change the ECG representation
Toggle views
You can cycle through all views which consist of only one column and have the same
number of leads.
◆ Click Refresh to toggle the views.
If you selected a 3-channel or a 6-channel representation, you can use the refresh in the
header to switch to the other lead groups.
Change the mode of representation
The mode of representation affects only multi-column representations.
◆ Synchronous mode—the waveforms in the left column and the waveforms in the
right column are written simultaneously.
◆ Sequential mode—the waveforms in the left column and the waveforms in the right
column are written consecutively.
• Advantage—the waveform is overwritten only half as often. This allows longer
viewing of the ECG.
• Disadvantage—the ECG within a column is updated only half as often.
Configuration Options
The synchronous mode is the default.
Enable the sequential mode for
each procedure and for every
view
1. Select File | Options… | 12 Lead ECG | Test procedures.
2. Select the Display tab.
In all representations which are displaying real-time ECG, you
can select a multi-column view. To activate these views select
the Sequential mode option.