Product Manual

CareCenter MD 1.0 70-00533-02 A
3-21
Change the ECG representation
Select a view
Different views are available to display the ECG waveforms in different arrangements. To
define the views, they are divided into lines and columns.
Note: Temporary changes made to the waveform views are not saved when moving
between views. To save your preferences, set your preferences, exit, and then re-start the
application.
Note: During a long ECG acquisition, when using a multi-column lead selection (for
example 3x4) in the Rhythm Line Display, recordings of 30 minutes or more may result in a
slight misalignment of the viewable sweep bar as the ECG waveform is refreshed. This occurs
in the Rhythm Line Display only, not in the primary diagnostic ECG display. Reviewing and
printing of ECG waveforms and stored ECGs are not affected. For long ECG recordings, select
no more than 3 leads to display in the Rhythm Line Display.
To c h an ge t h e vi e w s:
◆ Right-click in the ECG representation and select the view.
By default, the structure is:
Column1 # column2 # column3 # column4
Where:
◆ Column1—all leads displayed in the first column one below the other.
◆ Column2—all leads displayed in the second column one below the other.
◆ Column3—all leads displayed in the third column one below the other.
◆ Column4 —all leads displayed in the fourth column one below the other.
See Figure 3-2.
Figure 3-2: Example of 1 column with 12 leads