Product Manual

CareCenter MD 1.0 70-00533-02 A
3-19
Change the ECG representation
Change the ECG representation
You can change the speed, sensitivity, size and position of the ECG waveform.
Change speeds
To change the speed of the displayed ECG in the test:
1. Click the arrow to the left to decrease the speed.
2. Click the arrow to the right to increase the speed.
3. Alternatively:
a. Right-click in the ECG and select Speed.
b. Select the speed.
Default settings
Change sensitivity
To change the sensitivity of the displayed ECG in the test:
1. Click the down arrow to decrease the sensitivity.
2. Click the up arrow to increase the sensitivity.
3. Alternatively:
a. Right-click in the ECG and select Sensitivity.
b. Select the sensitivity.
Configuration Options
With every new acquisition, the speed is reset to the state preset for the test procedure.
Configure the presets for each
type of test procedure
1. Select File | Options… | 12 Lead ECG | Test procedures.
2. Click the Display tab and set the presets.
Setting range [mm/s] Presetting [mm/s]
Multi-channel ECG 5, 10, 25, 50, 100, 200 25
Rhythm line 5, 10, 25, 50, 100 25