Product Manual

70-00533-02 A CareCenter MD 1.0

3-16

ECG Acquisition

Note: You must select Electrode application before the system can start the

acquisition.

Once all electrodes are applied, click the orange Start Auto button or press F2 to start

acquiring the ECG or the stress test.

Note: The actual title of the orange button and the manual start controls are

dependent on the workflow. Start Auto initiates a timed test, Start initiates an test that

is not timed, and Start Test initiates a stress test.

•

If the system displays electrode faults you can start the acquisition using the

working electrodes, click Start Auto or Start to start the acquisition.

– At least the right leg electrode and two additional limb electrodes must be

operational.

– If you start the ECG with an electrode fault, then the system does not display all

channels. The display depends on the electrodes that are working properly.

Note: If the transmission is interrupted, the trace will stop displaying and the system

indicates the error condition until the transmission is restored.

Configuration Options

Configure the lead placements • Select File | Options | 12 Lead ECG | ECG.