Product Manual

70-00533-02 A CareCenter MD 1.0
3-10
ECG Acquisition
Automatically open the search dialog
If you configure the system to return to a preset test rather than to Data Management ,
then you can configure the search dialog to display automatically. This function is always
on for stress test acquisitions.
Additional active patient options
These additional options are available after you select the procedure:
Configuration Options
Configure the system to
prompt for the active patient
1. Select File | Options... | General | Environment and select a
test procedure from Start with test procedure.
2. For each test type to prompt for the active patient:
a. Select File | Options... | 12 Lead ECG | Test procedures,
and select the test procedure program.
b. Click the General tab and select At acquisition start,
automatically ask for a patient.
Note: STAT and STAT Rhythm tests do not prompt for the
active patient.
3. After you save a record for the active patient, select Continue
and the system prompts for whether or not you want to carry
out a further test procedure of this patient.
– To acquire another ECG, click Ye s .
– To search another patient’s file, click No.
Menu Item Function
Show Patient Details To display and edit the details for the active patient, choose a
method:
• Right-click Patient... and select Show Patient Details....
• Select Patient | Show Patient Details....
Closing active Patient If you do not want to use the data of the active patient for the ECG
acquisition, choose a method:
• Close the active patient.
• Right-click Patient... and select Close active Patient
• Select Patient | Close active Patient.
Select Patient Up to five patient tabs can be open in Data Management. The
open patients are listed in the patient menu.
To select a patient whose tab is open, choose a method:
• Right-click Patient... and then select the patient from the list.
• Select Patient and then select the patient from the list.