Product Manual

CareCenter MD 1.0 70-00533-02 A

3-9

Select the active patient

The active patient is the patient for whom the current ECG record is saved and stored.

◆ If the test procedure is selected in the Data Management screen, the system

automatically uses that patient as the active patient. See Select a default test procedure in

Data management on page 3-8.

◆ If the test procedure is automatically launched, you must select the active patient

during the ECG recording.

The title bar of the program shows the data of the active patient in the form:

[Patient number] Last name, First name Date of birth

Select the patient before starting an ECG acquisition

If possible, select the active patient before starting an acquisition.

If the active patient is unassigned, the system assigns the Select patient... function to the

orange (main) button and to the F2 key.

Note: The orange button and F2 are reassigned as you progress through the workflow.

◆ Click Select patient... or press F2.

To search for a patient, see Search for a patient on page 2-3. The patient found during

the search is used as the active patient, and thus for the ECG acquisition.

Select the patient during an ECG acquisition

You can select the active patient after the start of an acquisition.

To select the patient data during the acquisition:

1. Click Patient... or press Ctrl + E.

2. To select a different patient, click Search.

To search for patient data, see Search for a patient on page 2-3.

Configuration Options

Configure the display of the

main button. (If the button

does not display.)

• Select File | Options… | 12 Lead ECG | ECG and select First

step of the "Green Arrow" button is opening the patient